linux:raid
This is an old revision of the document!
Table of Contents
RAID
Dokumentasi seputar RAID
1. Membuat RAID 1 SDC & SDD
Membuat raid array full size dan berikut ini tahapannya
1.1 Format Hardisk
fdisk /dev/sdc
ikuti opsi ini
Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-8910, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-8910, default 8910): ( langsung enter apabila full size )
Kemudian tampilkan hasilnya
Command (m for help): p Disk /dev/sdc: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000923aa Device Boot Start End Blocks Id System /dev/sdc1 1 30401 244196001 83 Linux
Aktifkan partisi sebagai Raid Auto Detect
Command (m for help): t Selected partition 1 Hex code (type L to list codes): fd Changed system type of partition 1 to fd (Linux raid autodetect) Command (m for help): p Disk /dev/sdc: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000923aa Device Boot Start End Blocks Id System /dev/sdc1 1 30401 244196001 fd Linux raid autodetect Partition 1 does not start on physical sector boundary.
Lakukan hal yang sama seperti diatas pada SDD
Layanan
Harga Domain .COM | Harga Domain .ID | Shared Hosting | Email Hosting | MySQL Hosting |linux/raid.1455631867.txt.gz · Last modified: 2016/02/16 09:11 by kbadmin